Penglai Huande Steel Valve CO., LTD.

Brief Introduction of 3 Piece Floating Ball Valve

The 2 piece floating ball valve and the 3 piece floating ball valve are new types of valves that have been widely used in recent years. These types of valves should generally be installed horizontally in the pipeline. The 3 piece floating ball valve can be divided into a straight-through type, a three-way type and a right-angle type according to its channel position. The latter two ball valves are used to distribute the medium and change the direction of the medium. 3 piece floating ball valve installation and maintenance should pay attention to the following:
1. Leave the position where the valve handle rotates.

2. It cannot be used for throttling.

3. The ball valve with transmission mechanism should be installed upright.

Advantage

It is mainly used in the pipeline to cut, distribute and change the flow direction of the medium. It has the following advantages:
1. The fluid resistance is small, and the resistance coefficient is equal to the pipe length of the same length.

2. Its structure is simple. It is small in size and light in weight.

3. It is close and reliable. The sealing surface material of the ball valve is widely used in plastics and has good sealing properties, and has been widely used in vacuum systems.

4. It is easy to operate, and it can be opened and closed quickly. It can be rotated by 90° from full opening to full closing, which is convenient for long-distance control.

5. It is easy to maintain. The 3 piece floating ball valve has a simple structure, and the seal rings are generally movable, and the disassembly and replacement are relatively convenient.

6. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium. When the medium passes, it will not cause erosion of the sealing surface of the valve.

7. It has a wide range of applications. It is suitable for use from small to a few millimeters and as large as a few meters. It can be applied from high vacuum to high pressure. When the ball is rotated 90 degrees, all the spheres should appear at the entrance and exit, thus cutting off the flow.

The 3 piece floating ball valve has some unique features unique to its structure. For example, the switch has no friction, the seal is not easy to wear, and the opening and closing torque is small. This reduces the size of the actuators that are supplied. With multi-turn electric actuators, the medium can be adjusted and tightly closed. It is widely used in petroleum, chemical, urban water supply and drainage and other conditions that require strict cutting.
Related News
  • Mounted Electric Actuated Regulating Control Flanged Ball Valve For Chemical Resistant

    Mounted Electric Actuated Regulating Control Flanged Ball Valve For Chemical Resistant

    November 3, 2018Mounted Electric Actuated Regulating Control Flanged Ball Valve For Chemical ResistantQuick infoSplit Body, stainless steel ASTM A351 - CF8M, flanged ANSI 150 ball valve.• Full port sizes 1/2” to 8...view
  • The Introduction of the Male x Female Ball Valve

    The Introduction of the Male x Female Ball Valve

    May 7, 20191. It is widely used in worldwide chemical, petroleum, electricity, pharmaceuticals, beer, food, dairy beverage, cosmetics and various engineering pipelines.2. It is made up by cast steel, carbon stee...view
  • A Brief Introduction of the Ball Valve Male

    A Brief Introduction of the Ball Valve Male

    May 7, 2019The ball valve male and flange gate valve belong to the same type of valve. The difference is that its closing part is a sphere which rotates around the center line of the valve body to open and close...view
  • Reduce Bore Ball Valve

    Reduce Bore Ball Valve

    May 7, 2019Characteristics of Reduce Bore Ball ValveThe reduce bore ball valve is a new type of heat preservation valve developed on the basis of one-piece heat preservation ball valve to meet the special condit...view