Penglai Huande Steel Valve CO., LTD.

Three Piece Ball Valve

Flow-Tek's Triad Series ball valves characteristic stay loaded stem seals and a redundant physique seal design. Available in full and widespread port models, these rugged, excessive stress three piece valves are best for process, severe service, high temperature, and excessive cycle applications.
Secure Mount: Triad Series valves provide ease of automation due to an integrally cast actuator mounting pad that complies with ISO 5211 requirements through 2" valve sizes.
3 Piece Valve Design
The three piece physique sketch of the Triad Series presents many advantages, together with installation flexibility, elimination of the needfor two sets of flanges, and ease of in line and out of line servicing. These time-saving features are really helpful for procedure industries, automaticvalves and welded piping systems by decreasing pricey downtime. During maintenance, the actuator and accessories can continue to be installed on the valve body. The entire valve and actuator meeting is without difficultyreinstalled with no want for recalibration of the unit. 

In Line Servicing: To operate in line maintenance, dispose of the physiquebolts on opposing facets of the middle body, loosen the 2 bolts at the top of the valve and swing the physique up. The valve can swing to the left or rightrelying on which bolts are removed. All physique aspects can be serviced in this role except disturbing the piping system. 

Out-of-Line Servicing: For complete elimination of valve from the line, eliminate all body bolts, then raise the valve body out of the pipeline. The eliminated body can be serviced or replaced, then reinstalled besideswanting to realign the cease connections or the piping system.

Welcome to Huande, one of the leading valve manufacturer, for more product details.
Related News
  • The Introduction of 1 PC Ball Valve

    The Introduction of 1 PC Ball Valve

    May 7, 2019Fundamental contentsThe 1 pc ball valve and the flange gate valve are the same type of valve. The difference between the closing piece of the 1 pc ball valve is a valve that rotates around the center ...view
  • How to Clean the Y Strainer Parts of the Fan Coil?

    How to Clean the Y Strainer Parts of the Fan Coil?

    May 7, 20191. Close the chilled water in and out of the valve of the fan coil and open the exhaust valve and release the water of the fan coil.The exhaust valve is effluent and is from large to small to no water...view
  • A Brief Introduction of the One-piece Hexagonal Ball Valve

    A Brief Introduction of the One-piece Hexagonal Ball Valve

    May 7, 2019It is used to cut off or connect the medium in the pipeline. Choosing different mediums can be applied to various mediums, such as water, steam, oil, nitric acid, acetic acid and so on.The Details of ...view
  • Selection of Check Valve

    Selection of Check Valve

    October 9, 2019The valve type selection of check valve shall be determined according to the installation location of check valve, the water pressure in front of the valve, the sealing performance requirements after ...view