Penglai Huande Steel Valve CO., LTD.

2 Piece High Platform Internal Threaded Ball Valve

2 Piece High Platform Internal Threaded Ball Valve
Related Products
  • 1 Piece Internal Threaded Ball Valve

    We use wax injection and de-wax craftwork to produce the precision casting 1 PC internal thread reduced bore ball valve, which allows the product with zero detect and sells well in the global world. U...

  • 2 Piece Internal Threaded Ball Valve

    2 piece internal thread ball valvePenglai Huande Steel valve co.,ltd exports precision casting floating ball valves. Our 2 piece internal ball valves are produced by the craftwork of wax injection and...

  • 3 Piece High Platform Internal Threaded Ball Valve

    Pengai Huande Steel Valve Co.,Ltd export precision casting stainless steel floating ball valves to all over the world. This is our three piece internal threaded ball valves with a high platform. Usual...

Full.bore.ISO5211.

Threaded.ends:ANSI.B2.1.BS.

21,DIN259/2999.JIS.130202/130203

Internal.entry.blow-out.proof.stem

Material:.CF8M.CF8.CF3M.WCB

Pressure.rating:.1000PSI.WOG

Pressure.test:.API.598

Lever.handle.with.locking.device

specification-of-2-piece-high-platform-internal-threaded-ball-valvespecification-of-2-piece-high-platform-internal-threaded-ball-valve1
Welcome to visit our homepage, we are Penglai Huande Steel Valve CO., LTD who are specialized in producing precision casting stainless steel ball valves. The valves can be forged and cast. Besides, we can also produce carbon steel ball valves for our customers. This is our two piece internal thread ball valve. The ball valve consists of a valve body and a valve cover, which is called two-piece type. One-piece type is an integral structure. The two-piece ball valve has improved one-piece valve with less flow and is easy to leak. The cover is increased to prevent leakage.

This is notice provided for you when you use the two piece internal thread ball valve:

1. The installation position, height, and direction of the entrance and exit must meet the design requirements, and the threaded connection should be firm and tight.
2. All types of manual valves installed on the insulation pipe, the handle must not be down.
3. For valves with a working pressure greater than 1.0 MPa and a cut-off effect on the main pipeline, strength and sealing tests should be performed before installation, and they can be used after qualification.
4. Between the valve flange and the pipeline flange, seals are installed according to the piping design requirements.
5. The ball valve with transmission mechanism shall be installed in accordance with the instructions of the product manual.

The details of our two piece internal tread ball valve are as follows:

Size of 2 Piece High Platform Internal Threaded Ball Valve:

Size 1/4 3/8 1/2 3/4 1 11/4 11/4 2 2-1/2 3 4
Φd 11 12.7 15 20 25 32 40 50 62 76 94
L 49.5 49.5 55 70.5 82.5 90.8 103 120 152 172 220
LO 110 110 110 136 136 158 203 203 324 324 324
H 62 62 64 72 74 87 98 106 140 149 165
H1 9.5 9.5 9 11.2 11 15 15 15 19 19 19
H2 36 36 38 41.5 44.4 54 59.5 67 98 107.5 123.5
E 9 9 9 11 11 14 14 14 17 17 17
B 38 38 42 50 50 66 66 66 93 93 93
ISO
5211
F03 F03 F03
F04
F04
F05
F04
F05
F05
F07
F05
F07
F05
F07
F7
F10
F7
F10
F7
F10


Specification of 2 Piece High Platform Internal Threaded Ball Valve:

No. Drawing.No. Name Material QTY
1 V2M-000l Body CF8M 1
2 V2M-0002 Cap CF8M 1
3 V2M-0003 Ball CF8M 1
4 V2M-0004 Stem 316 1
5 V2M-0005 Seat PTFE+3%.GF 2
6 V2M-0006 Gasket PTFE 1
7 V2M-0007 Thrust.washer PTFE+15%.Graphite 1
8 V2M-0008 O.ring Viton 1
9 V2M-0009 Stem.packing PTFE 1
10 V2M-0010 Gland 304 1
11 V2M-0011 Butterfly.pad 301 2
12 V2M-0012 Nut 304 2
13 V2M-0013 Lock.washer 304 1
14 V2M-0014 Stopper.washer 304 1
15 V2M-0015 Handle 304 1
16 V2M-0016 Handle.lock 304 1
17 V2M-0017 Handle.sleeve Rubber 1
18 V2M-0018 Flat.washer 304 1
19 V2M-0019 Stopper 304 1

Leave us Message

`